🧘♂️ VIVELO AURA | Product User Guide
🧘♂️ VIVELO AURA | Product User Guide
Operation Mode Settings (Mine Reclamation)
🔘 Power On/Off: Press and hold the power button for 2 seconds to turn the device on or off.
🔵 Serenity Mode (Blue Light): Sprays once every 8 minutes. (Color ambient light ON)
🟢 Vitality Mode (Green Light): Sprays once every 5 minutes. (Color ambient light ON)
🟣 Smart Mode (Purple Light): Sprays 3 consecutive times every 10 seconds, then automatically switches to Serenity Mode after 15 minutes. (Color ambient light ON)
🔴 Pure Mode (Red Light): Sprays once every 8 minutes. (Color ambient light ON)
5. Charging Instructions
🔋 During charging, the indicator lights will turn on sequentially.
When fully charged, the fragrance spray indicator will remain steadily lit.
🔋 When the battery level drops below 10%, the indicator light will flash.
If the battery level falls below 3%, the device will automatically power off.
✅ Smart Power-Saving & Safety Protection Function
If no movement is detected for 15 minutes, the device automatically switches to power-saving mode, minimizing unnecessary power consumption and oil evaporation.
This feature enhances battery efficiency, prevents internal overheating, improves stability, and extends the device’s lifespan a truly smart power-saving design.
Once slight movement is detected, the device automatically reactivates, ensuring a continuously pleasant aroma environment.
In vehicle environments, if no vibration is detected for 15 minutes, the diffuser automatically enters power-saving mode.
-
When the car starts moving again, the vibration is detected and the diffuser resumes operation automatically.
During driving, the aroma continues seamlessly without manual control, and when stationary, the system prevents overheating — maintaining a safe and comfortable aroma atmosphere at all times.
Filter Installation Guide
1️⃣ Open the Bottom Cap
Gently rotate the circular bottom cap counterclockwise to open.
2️⃣ Insert the Scent Filter
Place the scent filter inside the diffuser according to its inner shape.
⚠️ Caution: Do not press the filter too firmly.
Forcing it in may cause difficulty when removing it later.
3️⃣ Close the Cap
After inserting the filter correctly, rotate the bottom cap clockwise to close it securely.
4️⃣ Power & Mode Setup
Press the power button to turn on the device and select your preferred scent intensity or mode.
💡 Tip: Before use, make sure the filter is properly installed to ensure smooth and even fragrance diffusion.
(🎥 For detailed replacement steps, please refer to the video guide.)